The Cosmi suction cup is an essential accessory element for Ionmax rental screens. This device has an absorption system.
What is the Ionmax suction cup used for?
This suction cup has been created as an essential element for Ionmax Cosmi rental screens. As is the case of the screen for rental 1.86 and the pantalla P2,5. It serves as a tool for the extraction of rental plates through front access. The suction cup allows you to remove any LED board from the full full color screen without exerting any damage to it. Which means fast access to the interior of the screen for rental Cosmi. Being able to access through any board at any time.
If this suction cup is not used, access to the interior of the screens for rental Cosmi must be done by removing plate by plate from the outer edge to the inside of the screen, to the plate to which you want to have access. This procedure is ideal to prevent damage to any board, LED or component of the Cosmi Full Color screen.
Since there is such a tiny separation between LEDs, it is foreseeable to avoid collision between plates or LEDs when removing each plate through the front access. Therefore it is recommended that if you do not have the Ventonsa Ionmax this way of proceeding inside is used.
How does it work?
- First, the suction cup is placed on the rental plate to which you have access.
- Once this suction cup is centered, the power button is pressed and through its high power it creates a closed air circuit, leaving a gap between the rental plate and the accessory, which allows it to be removed from the full color screen.
- When the air has exerted its pressure on the plate, it will be anchored to the suction cup and its extraction will proceed.
Access to the inside of a magnetized plate with the Ionmax suction cup
Summary of how IONMAX plates are removed